13 Gal 120 PSI Hot Water Heated Carpet Extractor w/ 12" Wand & 25' Hose

This CleanFreak heated carpet extractor uses hot water and an adjustable glide wand to remove as much dirt from your carpets as mechanically possible. The single jet wand has a #02 spray jet and an adjustable glide that consistently recovers 30% more solution on each pass, no matter the angle. Not only do you get great recovery power with this extractor, but you also get unbelievable heat! The dual 1000 watt heaters will provide a maximum water temperature of 210° F. Between the heater, pump, and vacuum, you'll need to power the unit with electrical outlets on 2 separate circuit breakers. The machine itself has a built-in circuit locator that will tell you if you're on 2 separate circuits or not. Simply press the circuit locator button when plugged into 2 separate outlets, and if the light turns on, you know you're good to start extracting. If not, you'll need to search for another outlet.

Features: 

• Dual 1000 watt heaters provide outstanding heating power for hot water extracting.
• 12" adjustable glide drag wand recovers 30% more solution than standard wands.
• 2 power cords (black - vacs & pump | yellow - heaters) allows you to only run the vac motors & pump if needed.
• Side dump valve and back dump hose allows you to dump your solution in the most convenient place.
• Remove 2 bolts to tilt the tank back to easily access the interior where the pump, motors & heaters are located.
• Extremely portable, weighing only 95 pounds, this hot water extractor allows the user to access stairways and upper levels effortlessly.